_                                          _                 
 
  Home   Advertise with us   Contribute an article    Headline news


Activities

Countries

Fun Videos

Knowledge

For sale

Recipes

Camping 

Scrapbook
albums

Guestbook/ newsletter

Archives 

Sponsors

Physical Fitness

Events

Itinerary

Contribute

Job  ads

Free rental ads

Privacy Policy

Calendars

Living Vicariously

Safety tips

Wut2do

Search

Associate

Send us a link

Link to Us

Table of contents

Contact us

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speeding up your computer

If you notice your computer getting slower you may have to tune it up or have it done by a professional. Seeing as how we are supposed to be "Professionals" we will share with you a few tips for speeding up your computer. These are some of the things that your computer tech would do and charge you as much as $125.00 per hour and has been closely guarded lest the knowledge become common and bite into their paycheck.

There a many software developers who have created programs to attempt to speed up your computer, however many of the are not worth the space they take up on your hard drive. Venture carefully when adding supposedly helpful programs, plug-ins and toolbars to you computer. You will find that many of them take over control of some portion or function of your computer. See our section on Adware and Spyware. You will most likely see ads on this site that promote software or services, but just because they show up on this site does not mean that we endorse them or have even tried them. Much of the advertising such as in the cell to the right, is supplied by a third party and is supposed to be relevant to what is on each page and changes from time to time.

Ready?

Good. We are presuming that most people are still using Windows 98 as when we check our stats to see who has been to our site (and we can), we have found that 78% are using Windows 98 so this is the method we will address here and maybe later get around the other various operating systems. Regardless which Windows version  you use the methods will be similar but for Linux users it is a whole different ballgame. Linux is generally used by those who know more than most of us  about the operation of computers. A real smart bunch they are.

Follow the steps below in the order that thy are presented for best results.

See legal before continuing.

1.  Without any programs  running and preferably after a fresh start up, Double click on the "My Computer" Icon on the desktop and then select help. In the Help dropdown menu select "About Windows". In the window that opens you will see     or similar. Note the amount of memory. You should have at least 500,000 KB of memory showing, if not then this is the first thing you need to do; buy some more memory and have it installed. Secondly notice the System resources. In this case they are showing 62%. If you see anything less than 85% on a fresh start up then there are to many programs or utilities running in the background. You may have allowed programs to install all types of programs in your "Startup" files ( you may have to uninstall some utility programs or non essential portions of them to help raise your resources) or if you have one of the common computers found at most retailers,  you may have a whole host of programs installed by them at the factory that are intended to solve problems for you, so you don't have to call them. Unfortunately these programs are oftentimes  the problem. If you find this to be the case, call them to find out find out how to disable them and we recommend that you do, or continue down the  text and find a home remedy.

2.  Click on your Control key, your Alternate key and your Delete key all at the same time. You will get a "close window" Dialog box. If you have more than 4-5 programs listed in this box then you have too many programs in your Startup process. You will need to modify your Startup utility. Click the "Cancel" button and read on.

3.   MSCONFIG: For this you need to get into a part of the computer that not everyone should get into. However if you feel comfortable, then proceed. 

  • Click the Start button and go up to "Run" click it.

  • In the box that comes up type in "msconfig"  and then click OK. 

  • You will get a window that is called System Configuration Utility. Along the top are tabs like in a file folder. Click on "General"

  • If there is a checkmark in the box in front of "Process Config sys file" or "Process Autoexec.bat file" click on the boxes to UN- check them. 

  • Next click on the "Startup" tab at the top

  • In the window that comes up click to UN-check everything except "System Tray"," ScanRegistry", "SchedulingAgent", and any of the files that have to do with your antivirus service. (caution, some of the service such as Norton and McAfee  will show up as Symantec or Computer Associates. leave these in.) Just a note: You don't need any programs from your printer or messenger services,. These can be activated when needed.  

  • When you are done click "apply" then "OK".  You will be prompted to restart your computer, do so.

See our  Clean your System Start Up for a picture and instruction on cleaning the look of the Start Up utility.

When it has fully restarted and the hour glass has disappeared then Repeat step Number 1 and 2 above. You may have to perform step number 3 to see if you were successful in removing the startup files as some of them are very stubborn and require you to uninstall the particular program and the reinstall it , if you need it, but watch carefully for a permission request asking to be allowed to be installed in the startup menu. Don't allow this.

4.  Uninstall unnecessary or undesirable programs and utilities. You do this by entering your "Control Panel" in the "Start Menu" by clicking the start button and going up to setting and clicking on Control Panel. In the panel select "Add/Remove Programs" you will get a new window that looks something like this: 
Select the files that are unnecessary or causing problems and then click the Add/Remove button. Some programs will give you the opportunity to modify which portions of it are to be installed while other will be removed completely. On occasion you may not be able to uninstall a file because it is "In use by Windows". In this case use the multiple keystrokes described in step number 3 and in the close program menu select the offending program and select "End task" Sometimes it will not close on the first attempt and you may have to repeat this more than once, but make sure that you wait 8 seconds after the Close Program window closes before trying again. 
When uninstalling you may get a message stating that you have some "Shared Files" and a request to remove them. It is best to tell it "NO" or "NO to all" as these files may be needed by some other program, and removing them will cause problems. You may be required to restart the computer several times when uninstalling.. Remember that you can always reinstall the same programs later but do not let it install to the "Startup" file, or you will have the same situation all over again.

5.  Click on the Internet Explorer Icon to bring it up. On the top toolbar click on "Tools" then go down to internet options. Click on the "Delete Cookies" button and OK, then the "Delete Files" and OK. This one may take a little while. Clear History is optional but if nothing else you should set the "Days to keep pages" down to 7 days.

6.  Perform a "Disk Cleanup " by going to Start then Programs, over and up to Accessories and then over and down to "System Tools", then over to "Disk Cleanup". This will bring up  a drive selection box and then a list of file categories that should be removed from the computer. Do this.

7.  Next you need to dump the Recycle bin. Click on the "Recycle Bin" Icon on the desktop and in the window click "File" at the top and then "Empty Recycle Bin".

8.  This is a very important part. The registry (kind of like an index) need to be purged of all erroneous entries pointing to files that are no longer where they used to be. Correcting this will not only speed up your computer but will also help to keep it from crashing. There are several utilities out there to assist in this as it is beyond most persons abilities.  If you have Norton Utilities then you can run WinDoctor, but even better than that is  Registry First Aid . You can download the free trial version but it is worth it to pay the few bucks they are asking for the fully functional version. Straightening out your registry works a world of good. Compress the registry at the end of this procedure and reboot.

9.  To run a "Scandisk" follow the steps by going to Start then Programs, over and up to Accessories and then over and down to "System Tools", then over to "Scandisk".

Be sure to select "Thorough" and "Automatically fix errors". Click start and go find something else to do for a while as this will take quite a while maybe even hours depending on your computer.

10.  Once Scandisk is finished you go back to system tools as described above but this time select "Defrag" and start it and once again find some thing else to do as this may take even longer than did the Scandisk program. What this feature does is to gather all the fragment of related files and group them all together. Norton also has a very good program for this called "Disk Doctor: on the Utilities disk.

11.  All computer programs and most hardware are in a constant debugging process. Windows and its accompanying programs are no different and need to be updated from time to time. If you have not been doing this then you may have several hours of work in front of you, but again it is worth it. Microsoft wouldn't spend the resources to create the updates if they weren't needed. Click Start then go all the way up to Windows Update   Scan for updates and then review and install them. You may not need the last 38 "Windows update" as they pertain to languages, but be sure to look over to the left side of the screen and check for any updates including the "Drivers Updates". When you are done with all the Windows up date go to the top of the page and select "Office Updates" if you have the Microsoft Office programs such as Word and Excel etc.

12.  In the System Tools that you accessed thru Programs  then Accessories run the "Maintenance Wizard" to have the Disk Cleanup , Scandisk and the Defrag utilities run automatically at predetermined times so long as your computer is turned at the scheduled times. This process will help to keep the computer tuned up! You can always modify the scheduling of these utilities by selecting  "Scheduled Tasks" in System Tools

13.   Repeat steps 1 thru 11 in about one week just to be sure and then once a month there-after.

If you have any additional tips on this subject submit them for publishing.

 

Click here to make wut2.com your homepage 

   Go to top      Build an Itinerary

  About wut2.com       Advertise with us        Link to Us        Contact us     Report Errors         Job Opportunities          Legal           Copyright